Crane loading
BA RD24_RD28 en us 06
Special notes
The crane vehicle must be positioned on flat ground providing
•
the bearing capacity required while observing all relevant safety
regulations.
The crane's load table must correspond to the weight and the centre
•
of gravity of the machine to be lifted.
Take suitable precautions to block access to the lifting area in order to
•
prevent any person from moving or staying within the danger zone.
Hoisting gears may only be attached to the appropriate lifting lugs
•
provided for them.
16398
Observe the lifting capacity of the sling gear.
•
Use lifting frames or spreader beams if necessary.
•
Foreword
Loading and transporting
29