Wacker Neuson RD 24 Instruction Manual page 21

Type plate roll-over
protection ROPS
Engine nameplate
BA RD24_RD28 en us 06
The roll-over protection, ROPS, approved by the manufacturer for this
machine is marked by a type plate attached at the cabin / roll-over bar
(see page 40).
B
C
F
[A] Series / type (part of the VIN /
PIN)
[C]
Cabin / ROPS identification
number 2
[E] Cabin / ROPS serial number (if
available) 2
[G] Year of construction
The engine approved by the manufacturer for this machine is also
indicated by a specially produced type plate. As a rule, this is located
near the machine type plate.
G
[A] Engine manufacturer
[C] Engine identification number
[E] Emission level EU / USA
[G] FIN / PIN
A
D
E
G
H
[B] Cabin / ROPS identification
number 1
[D]
Cabin / ROPS serial number (if
available) 1
[F] FOPS identification number (if
installed)
[H] Tested up to the maximum
operating weight
A B
C
D
E
F
[B] Type
[D] Type approval number
[F] Exhaust after-treatment
Foreword
Type plate
17237
17390
21