Precautions For Use And Safety - infaco AT1000 Original User Manual

Powering on
Always keep your hands away from the work zone when the machine is
powered on.
There is no on/off button on the machine, disconnect the battery to power it off.
has an automatic standby mode after 3 minutes of non-use (power LED flashing
green).

Precautions for use and safety

For a full day's use, make sure the battery is fully charged (3 LEDs lit on the product).
Always disconnect the battery from the product for any handling other than tying and
mainly for lubrication, cleaning or maintenance.
Do not leave the product and/or the battery on the ground, and do expose them to the
elements.
Make sure the battery's protective plastic casing is not cracked and does not seem to have
suffered impacts or other damage.
When working, it is normal for the battery temperature to rise (as well as when charging).
The recommended operating temperature is between -5°C / 23°F and 35°C / 95°F. Use
outside this temperature range may reduce the tool performance.
After using in the rain or in a damp environment it is strongly recommended to store the
(disconnected) device outside its case in a heated and ventilated location.
8
1. Connect the battery to
the machine, the unit is
powered on in standby
mode.
2. Press the trigger twice to
exit standby mode.
3. The product is ready for use.
It