Table of Contents
Advertisement
Lubrication
Open the beak by pressing the
1
ridged area down while tilting it
forward.
3
Raise the press roller towards the top cover.
Lubricate the press roller shaft using
4
the oil provided in the case. Do not
apply oil to the roller teeth. Lower the
press roller, then close the top cover
holding it down while pushing it towards
the beak to clip it in place
20
(once per week)
1
2
Open the top cover by pulling back
2
and lifting it.
2
1
Lubricate the clamp. Close the
5
beak.
The tying machine is ready for use.
Advertisement
Table of Contents
