Table of Contents
Advertisement
Use
Loading the reel
1.
Open the dispenser zipper.
2.
Take the twine from the inside of the reel and insert it into the dispenser. Do not
remove the label holding the reel.
3.
Insert the twine into the dispenser's output nozzle.
4.
Close the dispenser zipper.
Reel replacement
1.
Remove label from empty reel and check that there is no residue inside the reel.
2.
Check that there is no residue inside the machine (see details in the "Maintenance"
section page 18).
3.
Repeat the same operations as when loading a reel.
Loading the twine
Pass the twine through the opening until it stops, then pull
the trigger to load the twine.
Each time the reel is replaced, the first tie may not
be correct. Remove the residual twine from the
beak, then repeat the tying operation.
9
Advertisement
Table of Contents
