Table of Contents
Advertisement
Precautions for use and safety
The machine is fitted with an electronic board with thermal circuit-breaking.
As soon as the head jams because of too strong resistance, the electronic board cuts the
power to the motor and the red LED lights. To restart, place the switch in the "OFF" position,
then switch it back to "ON". When the motor temperature is too high, the board cuts the
motor power supply. To restart, carry out the previous operation.
When the machine starts, if there is significant vibration,
check the comb fitting and tightening.
immediately and contact your nearest dealer.
We also recommend that you keep the machine protection packaging for possible returns to
the factory for after-sales operations.
For the transport, storage, servicing, maintenance of the tool, or any other
operations not related to tool function operations,
the device.
2
2
12
1 OFF
1 OFF
before transport
and storage
before transport
and storage
stop the machine immediately and
If the significant vibration persists,
Disconnect
Disconnect
stop the machine
it is imperative to disconnect
Advertisement
Table of Contents
