infaco AT1000 Original User Manual page 11

Battery charge level
The battery charge level is indicated by the three LEDs on the product's charge indicator.
Charge indicator
Battery low state:
When the last LED flashes green, the battery charge is less than 10%.
Battery flat state:
When the battery is completely flat, the product stops. The last LED switches to fast flashing red.
The battery must be recharged (see page 12).
Automatic standby switching
The electronics have an automatic standby mode after 3 minutes of non-use (power LED
flashing green).
Exiting standby mode
To restart the machine, pull the trigger twice.
Automatic product shut down
The product has an automatic shut down that cuts the power supply to the product if not
used for 15 minutes. Pull the trigger once to switch it to standby mode.
Stopping the product
Remove the battery to power off the product.
11