infaco AT1000 Original User Manual page 13

Hide thumbs Also See for AT1000:
Table of Contents

Advertisement

Charging the battery
It is strictly forbidden to charge the batteries when the temperature in the room is
below 0°C / 35°F or higher than 40°C / 104°F.
During charging, neither the battery nor the charger should be covered, nor should they be
close to a heat source or to flammable products.
The time to fully charge an AT185B battery is approximately 3h.
1
Start up the charger.
Connect the battery to the charger's
2
output cable.
When the battery is connected, the
3
charger
detects
charging. The status LED switches to
steady yellow.
Battery 80% charged: the status
4
LED switches to flashing yellow.
Battery 100% charged: the status
5
LED switches to steady green.
it
and
starts
13

Advertisement

Table of Contents
loading

Table of Contents