LED indications
The product is operational
Overheating pause (temporary product shutdown)
Battery flat (Product shutdown)
Safety (product shutdown)
Twist indicator
The twist indicator is used to determine the fault.
If the problem persists, contact a dealer.
Charge indicator
Twist level indicator
Steady green LED: the product is ready for use.
1 flashing green LED: the product is in standby mode. Pulling the
trigger twice will exit standby mode.
1 flashing orange LED: the tool has overheated, wait for the
machine to cool down.
1 flashing red LED: battery flat. It must be recharged (see page 12).
1 steady red LED: machine fault. Unplug the battery to power
it off, then plug it back in to turn your machine back on. If the
problem persists, contact a dealer.
Level 1: Twine output jam
Level 2: Reel/cutting jam
Level 3: Stem jam
Level 4: Internal problems
17