Table of Contents
Advertisement
Servicing
Always remove the battery before
working on the product
Product cleaning
Locate ridges where beak meets the
1
body and press down while pushing
forward.
Raise the press roller towards the
3
top cover.
Check that there is no residue in the
5
beak, otherwise clean it.
Proceed in reverse order to close the
6
machine (operation 3 to 1).
18
1
2
Open the top cover by pulling back
2
and lifting it.
2
1
Clean all residue from the twine
4
passage.
Recommendations: avoid using any
corrosive products that could damage the
machine. When in doubt, contact INFACO
for the choice of products to be used.
Advertisement
Table of Contents
