Precautions For Use And Safety; Servicing And Maintenance - infaco E500 Manual

Precautions for use and safety

The machine is fitted with an electronic board with thermal circuit-breaking.
As soon as the head jams because of too strong resistance, the electronic board
cuts the power to the motor and the red LED lights. To restart, place the switch in
the "OFF" position, then switch it back to "ON". When the motor temperature
is too high, the board cuts the motor power supply. To restart, carry out the
previous operation.
When the machine starts, if there is significant vibration,
immediately and check the comb fitting and tightening.
If the significant vibration persists, stop the machine immediately and contact
your nearest dealer.
We also recommend that you keep the machine protection packaging for possi-
ble returns to the factory for after-sales operations.
For transport, storage, servicing, machine maintenance or any
other operation not related to using the machine,
to disconnect the machine.
OFF
A /
1
2
C /
stop the machine
it is imperative
OFF
B /
2
9

Servicing AND MAINTENANCE

All servicing and maintenance operations must be
carried out with the machine disconnected from all
energy sources.
Adapt servicing frequency to your use of the
machine.
Occasional use, space out the frequency. Intensive
use, increase the frequency.
Complete machine
Fixing the comb
Carbon rod
1
Vibrating head
Power
cord
Battery
Vest
Handle
Visual inspection of its
X X
condition
X
Cleaning
Inspection by the dealer
X
Gap check
Visual inspection of its
X
condition
X
Cleaning
Replacement
Gap check X
Lubrication X
Inspection by the dealer
Visual inspection of its
condition
Visual inspection of its
X X
condition
Visual inspection of its
condition
Visual inspection of its
X X
condition
10
X
X X
X X
X
X X
X X X
X X
X X X