Table of Contents
Advertisement
FDA Label Identification
The International Electrotechnical Commission laser safety standard IEC 60825-1:2007 mandates
warning labels that provide information on the wavelength and power of emitted laser
radiation, and which show the aperture where the laser is emitted. Figure 1 shows examples of
these labels and their location on the Emblaser 2.
Laser Aperture Label
LASER
IEC 60825.1: 2014
Toxic Fumes / Par�cles May Be
Generated By This Machine
Front Information Label
Certificate: Complies with 21 CFR
1040.10
except for deviations
pursuant to Laser Notice No. 50
dated June 24, 2007
Manufacturer: Darkly Digital Pty Ltd.
10 Baranbali Grove, Greensborough,
Australia, 3088
Manufactured at: 130 Melrose Drive,
Tullamarine, Australia 3043
Australian Registered Design:
201612348
Rear Information Label
Figure 1: Warning advisory and US FDA compliance labels and their locations.
9
1
Model
: Emblaser 2
Voltage
: 12 VDC
Rated Current
: 7 Amps
Communication
: 802.11 b/g/n
Serial No:
Manufacture
Month Year
Date:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Darkly Labs
R
Distributor:
Advertisement
Table of Contents
