Plugging In - Darkly Labs EMBLASER 2 User Manual

Plugging in

15
1.
Attach Exhaust Hose
Attach the end of the exhaust hose to the rear connector on
your Emblaser 2. Ensure the free end of the hose is placed
to allow venting of fumes safely out of your creative space.
2.
Plug in USB
Plug the supplied USB cable into the USB connector on the
rear of the Emblaser 2. Connect this to a USB port on your
computer.
3.
Connect the power
Plug the supplied power adapter into the power socket on
the rear of the Emblaser 2. Using the supplied power cable,
plug the adapter into a 110-240V AC outlet.