Table of Contents
Advertisement
Basic Lens Cleaning
If you notice a reduction in laser performance, it may be the result of a debris buildup on your
lens.
Always:
•
Use the recommended cleaning kit.
•
Treat the lens with care.
•
Use the recommended cleaning process.
•
Never:
•
Use paper towel or regular tissues.
•
Touch the lens with your fingers.
1.
Jog the laser unit up
Before you begin cleaning the lens, ensure the laser unit is
at its highest position. Use Laserweb to jog the laser unit to
this position.
NEVER force the laser unit to move by hand.
Always use Laserweb to adjust its height.
2.
Use the brush
Slide out the soft brush from your LensPen and carefully
brush the lens surface to remove any loose debris and
particles
3.
Use the cleaning tip
Remove the LensPen cap and, with light pressure, rub the
cleaning tip over the lens surface for approximately 10-20
seconds. Work the cleaning tip over all areas of the lens.
Be sure to replace the cap on your LensPen to keep it
primed and avoid contamination.
LENS
24
Advertisement
Table of Contents
