Table of Contents
Advertisement
6. CARING FOR YOUR EMBLASER 2
Maintainence Schedule
In order to keep your Emblaser 2 performing optimally, regular maintenance is required.
After every 1-2 hours of use
• Clean the interior workspace. .................................... (see page 23)
• Perform a Basic Lens Clean. ..................................... (see page 24)
• Check your air-assist nozzle is not blocked. ............. (see Page 25)
After every 10-20 hours of use
• Wipe the lid. .................................................................. (see page 23)
• Wash the cutting mats. ................................................ (see Page 23)
• Perform a Deep Lens Clean ...............
Failure to regularly perform a Deep Lens Clean
could lead to permanent lens damage.
After every 30-40 hours of use
• Lubricate the rails and bearings. ................................ (see page 23)
• Re-Run the Optics Calibration Process. ................. (see page 19)
• Check for any software or firmware updates.
22
http://tinyurl.com/E2LensClean
Advertisement
Table of Contents
