Table of Contents
Advertisement
Laser Height Control
The Emblaser 2 has the unique ability to set the height of the laser above the workpiece via
software. There is no need to manually adjust the laser height when working with materials as
the software sets this for you. Laser height control also allows you to control the laser height
during multi-pass jobs, changing the laser height automatically during each pass.
MATERIAL HEIGHT
It's important to know the height of the top surface of your material above the base-plate. This is
known as the 'material height'.
If you are using a cutting mat, as shown in the image above, it's thickness would be added to the
thickness of the material to determine the material height.
The material height is used within Laserweb operations to define the 'Start Height' parameter.
BASE PLATE
CUTTING MAT
WORK PIECE
20mm
10mm
21
Advertisement
Table of Contents
