Table of Contents
Advertisement
Updating Controller firmware
28
1.
Find your firmware version
The console window in Laserweb reports the current
firmware version when you connect to your Emblaser 2.
2.
Download new firmware
Download the latest firmware version from the 'Emblaser 2
Software / Installation' section of the Help Centre .
http://tinyurl.com/darklylabs
3.
Copy onto the Emblaser 2
Copy the new firmware version onto the Emblaser 2's
internal storage drive. This will appear on your computer as
a drive named 'Emblaser2'.
The file must be named firmware.bin
4.
Restart your Emblaser 2
Restart your Emblaser 2. The firmware update will only take
a few seconds and will not show any indications or taking
place.
Once complete your Emblaser 2 can be used as normal.
Advertisement
Table of Contents
