Table of Contents
Advertisement
General Maintenance
23
1.
Workspace
Ensure you regularly clean debris and any residue build up
within your workspace. Use a vacuum cleaner or cloth to
remove built up debris.
2.
Lid
Use a soft lint-free cloth to clean your lid. Never use paper
towel or abrasive materials on the lid as these will cause
scratching.
3.
Cutting Mats
The Emblaser 2 cutting mats are made from a durable
silicon compound. Over time they will become scorched
and stained. They can be washed in mild soapy water. Make
sure they are fully dried before reinstalling them.
4.
Rails & Bearings
The rails and bearings are mostly maintenance free. It's
recommended that after every 30 hours of use, the rails
are wiped with a lint free cloth and a small amount of the
provided lubricant applied.
Advertisement
Table of Contents
