Using the Cutting Mats
The cutting mats supplied with your Emblaser 2 are designed to assist in creating cleaner
cutting results and protect your Emblaser 2's baseplate from scorching. The mats are made of
a material very resistant to damage from the laser.
DO NOT LEAVE UNATTENDED
ORIGIN
20
1.
This is the top surface which faces upwards. Your material
is placed on this surface.
2.
Cutting Mat Thickness
The cutting mat is 10mm tall. This value needs to be added
to your material thickness when working in Laserweb.
For example, if you are using 3mm material and the cutting
10mm
mats, your total material thickness is 13mm.
3.
Cutting Mat Placement
On the base-plate of your Emblaser 2 is a label illustrating
the bottom edge of the workspace.
'Origin' indicates the bottom left most corner of the cutting
area (co-ordinated 0,0)
Align the first cutting mat with 'Origin' and arrange the
others as shown.
Top Side