Table of Contents
Advertisement
1. FOR YOUR SAFETY
To prevent damage to your Emblaser 2 or injury to yourself or to others, read the following
safety precautions carefully. Keep these safety instructions where all those who use the product
will read them.
WARNINGS
Do not use in wet surroundings
Water and electricity are a dangerous com-
bination. Ensure your workspace is dry and
not subject to potential wet conditions.
Always use in well ventilated area
Never use your Emblaser 2 in an enclosed
area which doesn't have good ventilation
and flow of fresh air.
Ensure fumes are properly vented
Fumes produced by the Emblaser 2 must
be vented safely through the exhaust hose
provided. This may include venting outside
through a window or via the optional Fume
Filtration System.
Ensure your material is safe to use
Materials react differently to laser cutting or
engraving depending on their chemical or
physical composition. Some materials pro-
duce harmful fumes or are more susceptible
to igniting. It is important to understand how
your material will react BEFORE using in the
Emblaser 2. A 'Material Reaction Table' has
been provided in this manual.
Never use materials containing chlorine
Materials containing chlorine will produce
extremely toxic and corrosive fumes when
laser cut or engraved.
Never use reflective materials
Reflective materials, such as materials with
mirror surfaces, will cause the laser to be re-
flected and potentially causing injury to the
user or damage to your Emblaser 2.
Do not use in the presence of flammable
gas
Do not use your Emblaser 2 in the presence
of flammable gas, as this could result in an
explosion or fire.
Ensure proper supervision of children,
disabled and impaired users.
The Emblaser 2 is not intended for children
under the age of 15 years. Children under
the age of 15 years should be supervised to
ensure they do not play with the Emblaser 2.
Teenagers aged between 15 and 18 years
can use the Emblaser with the consent and/
or assistance of their parents or persons
who have parental authority over them.
The Emblaser 2 is not intended to be used
by persons (including children) with reduced
physical, sensory or mental capabilities,
unless they have been given supervision or
instruction concerning use of the Emblaser 2
by a person responsible for their safety.
Do not operate the Emblaser 2 if damaged
Damage to any part of the Emblaser 2 could
compromise its safety and cause injury.
If any part of the Emblaser 2 is damaged,
contact your reseller or Darkly Labs directly
before operation.
Never run your Emblaser 2 unattended
Do not leave unattended while running .
If you see flame or fire - Immediately stop
the machine and extinguish. Not only could
a flame grow into a larger fire, its heat will
cause damage to the internal mechanisms
and optics.
6
Advertisement
Table of Contents
