Connection With The Mains - SHOWTEC 33036 Manual

Table of Contents

Advertisement

Performer 2000 Fresnel DDT MKII
Procedure:
If the device is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the device, with the mounting bracket, to the trussing system.
The device must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
When rigging, derigging or servicing the device, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
The device can be mounted to any kind of truss with a clamp.

Connection with the mains

Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
L
N
YELLOW/GREEN
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!
Ordercode: 33036
EU Cable
UK Cable
BROWN
BLUE
BLACK
GREEN
US Cable
RED
YELLOW/COPPER
SILVER
GREEN
6
Pin
PHASE
NEUTRAL
PROTECTIVE
GROUND

Advertisement

Table of Contents
loading

This manual is also suitable for:

Performer 2000 fresnel ddt mkii v1

Table of Contents