Performer 2000 Fresnel DDT MKII
6. Setting
In this menu you can adjust the device's special settings.
01) While in main menu, press the UP/DOWN buttons until the display shows SETTING.
02) Press the ENTER button to open the menu.
03) The display will show PASS CODE and you will need to insert a key combination which will unlock this
hidden menu. To do so, press the buttons in the following order: UP, DOWN, UP, DOWN, ENTER.
04) Press the UP/DOWN buttons to toggle through the following options:
KEY
DIMMER
CURVE
PERFORM
SLOCK
PERSONALITY
DMX ERROR
RESET
MODE SETTING
PWM RATE
6.1. Safety Key
01) When the display shows KEY, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between ON and OFF to activate/deactivate the safety lock.
03) When the option is active, you will need to insert the safety key combination every time the display
turns off.
04) When the option is inactive, the Settings menu will not get locked, providing that the device remains
in it.
05) If the display shows SETTING and turns off after 30 seconds – you will need to re-insert the safety key.
6.2. Dimmer Speed
01) When the display shows DIMMER, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle through the 5 options:
OFF
DIM1-DIM 4
6.3. Dimming Curve Settings
01) When the display shows CURVE, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to choose the desired dimming curve out of the 4 available options:
Ordercode: 33036
Safety key
Dimmer speed
Dimming curve settings
Performance settings
Settings menu safety lock
DMX channel modes
Save DMX/Blackout
Reset settings
DMX data transfer
Refresh rate
Dimmer Speed OFF
Dimmer speed, from fast to slow
20