Related Manuals for SHOWTEC 33036
Summary of Contents for SHOWTEC 33036
- Page 1 MANUAL ENGLISH Performer 2000 Fresnel DDT MKII V1 Ordercode: 33036 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
6.10. Refresh Rate ..............................22 7. Calibration ................................22 8. Info ..................................22 DMX Channels ................................23 1 Channel (UNO) ..............................23 2 Channels (DOS) ..............................23 3 Channels (STD.P) ..............................23 Cleaning ....................................24 Cleaning the glass lens ..............................24 Maintenance ...................................24 Replacing the Fuse ..............................24 Ordercode: 33036... - Page 3 Performer 2000 Fresnel DDT MKII Troubleshooting ................................25 No Light ..................................25 No Response to DMX..............................25 Product Specifications ..............................27 Dimensions ..................................28 Notes ....................................29 Ordercode: 33036...
-
Page 4: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Performer 2000 Fresnel DDT MKII ● 1 Powercon power cable 1,5m ●... - Page 5 Make sure that the core diameter of extension cords and power cords is sufficient for the required power consumption of the device. ● If the lens or LEDs are obviously damaged, it has to be replaced to prevent its functions from being impaired, due to cracks or deep scratches. Ordercode: 33036...
-
Page 6: Operating Determinations
● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service. -
Page 7: Connection With The Mains
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always properly connected to the earth! Improper installation can cause serious injuries and/or damage of property! Ordercode: 33036... -
Page 8: Return Procedure
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement from which the obligation is resulting. Ordercode: 33036... -
Page 9: Description Of The Device
Performer 2000 Fresnel DDT MKII Description of the device Features The Showtec Performer 2000 Fresnel DDT MKII is a theater spotlight fixture with high output and great effects. Input voltage: 100-240V AC, 60/50Hz Light source: 1x 250W CITIZEN LED ... - Page 10 16) Air intake grill 17) Motor 18) Motor frame 19) PCB 20) Rear plate 21) Rear cover 22) Transmission belt 23) Focus bracket 24) Focus bracket support 25) Screw shaft 26) Bottom cover 27) Power supply 28) Lens filter Ordercode: 33036...
-
Page 11: Backside
30) 3-pin DMX signal connector IN 31) 5-pin DMX signal connector IN 32) 3-pin DMX signal connector OUT 33) 5-pin DMX signal connector OUT 34) PowerCON power connector 100-240V OUT 35) Voltage switch 115/230V 36) Fuse T3,15AL/250V 37) LED display + menu buttons Ordercode: 33036... -
Page 12: Installation
01) Release the retaining clip by pressing the lock towards the lens and pressing the longer side of the screw. The retaining clip will open. 02) Insert the color frame(s). 03) Lock the retaining clip by pressing the retaining clip towards the lens. Fig. 04 Ordercode: 33036... -
Page 13: Setting The Angle
Performer 2000 Fresnel DDT MKII Setting the angle 01) Loosen the adjustment screw (do not remove them). 02) Tilt the fixture to the desired position. 03) Tighten the adjustment screw to secure the fixture in position. Fig. 05 Ordercode: 33036... -
Page 14: Control Modes
You can use the same functions on the master device as described on pages 18-22. This means that you can set your desired operation mode on the master device and all slave devices will react the same as the master device. Multiple Performers (Master/Slave control) Fig. 06 Ordercode: 33036... -
Page 15: Multiple Performers (Dmx Control)
Do not supply power before the whole system is set up and connected properly. Multiple Performers DMX Set Up Fig. 07 Note : Link all cables before connecting electric power Ordercode: 33036... -
Page 16: Fixture Linking
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m). • DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m), FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m). Ordercode: 33036... -
Page 17: Control Panel
When no button is pressed for 30 seconds, the display will turn off. To light up the display, you have to press the MENU, UP, DOWN, ENTER button or press the DIMMER or ZOOM control. Once you have pressed the button, the display will light up. Ordercode: 33036... -
Page 18: Menu Overview
Performer 2000 Fresnel DDT MKII Menu Overview Ordercode: 33036... -
Page 19: Main Menu Options
05) Press the UP/DOWN buttons to adjust the color intensity. The adjustment range is between 0-255, from dark to brightest. 06) Press the ENTER button to proceed to ZOOM. Press the UP/DOWN buttons to increase/decrease the ZOOM. The adjustment range is between 0-100, from small too big. Ordercode: 33036... -
Page 20: Run Mode
In this mode you can turn of the motor of the Performer. 01) While in main menu, press the UP/DOWN buttons until the display shows MOTOR. 02) Press the ENTER button to open the menu. 03) Choose the desired option, you can choose between YES or NO. Ordercode: 33036... -
Page 21: Setting
Dimmer speed, from fast to slow 6.3. Dimming Curve Settings 01) When the display shows CURVE, press the ENTER button to open the menu. 02) Press the UP/DOWN buttons to choose the desired dimming curve out of the 4 available options: Ordercode: 33036... -
Page 22: Performance Settings
DMX data transfer ON 03) If the display shows SELF, the Performer will not send DMX data to the other connected devices. 04) If the display shows MASTER, the Performer will send DMX data to the other connected devices. Ordercode: 33036... -
Page 23: Refresh Rate
06) If you choose UID, you will see the device’s code that will be sent to the RDM controller. 07) If you choose LABEL, you will see the device’s name that will be sent to the RDM controller. Ordercode: 33036... -
Page 24: Dmx Channels
Pulse strobe ON, from low to high frequency 180-189 Strobe OFF 190-255 Random strobe, from low to high frequency Channel 4 – Zoom 0-255 Gradual zoom adjustment, from small to big Channel 5 – Motor reset 0-200 No function 201-220 Motor reset 221-255 No function Ordercode: 33036... -
Page 25: Cleaning
03) Remove the used fuse. If brown or unclear, it is burned out. 04) Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to use a fuse of the same type and specification. See the product specification label for details. Ordercode: 33036... -
Page 26: Troubleshooting
Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Performer to your Showtec dealer. 03) The fuse. Replace the fuse. See page 24 for replacing the fuse. - Page 27 Turn up the air conditioning cuts out intermittently • Disconnect the fixture and return it LEDs damaged to your dealer The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Ordercode: 33036...
-
Page 28: Product Specifications
Performer 2000 Fresnel DDT MKII Product Specifications Model: Showtec Performer 2000 Fresnel DDT MKII Input voltage: 100-240V AC, 60/50Hz Power consumption: 195W (full output) DMX linking: 30pcs Fuse: T3,15AL/250V Dimensions: 380 x 286 x 392 mm (LxWxH) Weight: 6,6 kg... -
Page 29: Dimensions
Performer 2000 Fresnel DDT MKII Dimensions Ordercode: 33036... -
Page 30: Notes
Performer 2000 Fresnel DDT MKII Notes Ordercode: 33036... - Page 31 Performer 2000 Fresnel DDT MKII Ordercode: 33036...
- Page 32 ©2019 Showtec...
Need help?
Do you have a question about the 33036 and is the answer not in the manual?
Questions and answers