Related Manuals for SHOWTEC Performer 2000 Fresnel DDT MKII V3
Summary of Contents for SHOWTEC Performer 2000 Fresnel DDT MKII V3
- Page 1 MANUAL ENGLISH Performer 2000 Fresnel DDT MKII V3 Ordercode: 33037 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Performer 2000 Fresnel DDT MKII Table of contents Warning ....................................3 Safety Instructions ................................. 3 Operating Determinations ............................5 Rigging .................................... 5 Connection with the mains............................6 Return Procedure ................................7 Claims ....................................7 Description of the device ..............................8 Features .................................. - Page 3 Performer 2000 Fresnel DDT MKII Troubleshooting ................................25 No Light ..................................25 No Response to DMX..............................25 Product Specifications ..............................27 Dimensions ..................................28 Notes ....................................29 Ordercode: 33037...
-
Page 4: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Performer 2000 Fresnel DDT MKII ● 1 Powercon power cable 1,5m ●... - Page 5 ● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 6: Operating Determinations
Performer 2000 Fresnel DDT MKII ● For adult use only. The device must be installed beyond the reach of children. Never leave the unit running unattended. ● Never attempt to bypass the thermostatic switch or fuses. ● For replacement use fuses of same type and rating only. ●... -
Page 7: Connection With The Mains
Performer 2000 Fresnel DDT MKII Procedure: ● If the device is lowered from the ceiling or high joists, professional trussing systems have to be used. ● Use a clamp to mount the device, with the mounting bracket, to the trussing system. ●... -
Page 8: Return Procedure
Performer 2000 Fresnel DDT MKII Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the... -
Page 9: Description Of The Device
Performer 2000 Fresnel DDT MKII Description of the device Features The Showtec Performer 2000 Fresnel DDT MKII is a theater spotlight fixture with high output and great effects. ● Input voltage: 100–240 V AC, 60/50 Hz ● Light source: 1 x 250 W CITIZEN LED ●... - Page 10 Performer 2000 Fresnel DDT MKII Fig. 02 01) Front cap 02) Front lens cover 03) Lens tube 04) Front plate 05) Top cover 06) Adjustment screw 07) Mounting bracket with inclination screw 08) Heat-sink bracket 09) Lens plate 10) Lens frame 11) Collecting lens 12) LED board 13) Thermal switch holder...
-
Page 11: Backside
Performer 2000 Fresnel DDT MKII Backside Fig. 03 29) PowerCON power connector 100–240 V IN 30) 3-pin DMX signal connector IN 31) 5-pin DMX signal connector IN 32) 3-pin DMX signal connector OUT 33) 5-pin DMX signal connector OUT 34) PowerCON power connector 100–240 V OUT 35) Voltage switch 115/230 V 36) Fuse T3,15AL/250 V 37) LED display + menu buttons... -
Page 12: Installation
Performer 2000 Fresnel DDT MKII Installation Remove all packing materials from the Performer 2000 Fresnel DDT MKII. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. -
Page 13: Setting The Angle
Performer 2000 Fresnel DDT MKII Setting the Angle 01) Loosen the adjustment screw (do not remove them). 02) Tilt the fixture to the desired position. 03) Tighten the adjustment screw to secure the fixture in position. Fig. 05 Ordercode: 33037... -
Page 14: Control Modes
Performer 2000 Fresnel DDT MKII Control Modes There are 3 modes: ● Stand-alone ● Master/Slave ● DMX-512 (1CH, 2CH, 5CH) One Performer (Stand-alone) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 15: Multiple Performers (Dmx Control)
Performer 2000 Fresnel DDT MKII Multiple Performers (DMX Control) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Use a 3-pin/5-pin XLR cable to connect the Performers and other devices. 04) Link the units as shown in Fig. -
Page 16: Fixture Linking
Performer 2000 Fresnel DDT MKII Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 17: Control Panel
Performer 2000 Fresnel DDT MKII The Performer 2000 Fresnel DDT MKII can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel A) MENU button ENTER button C) DOWN button D) UP button ZOOM control LED display G) DIMMER control... -
Page 18: Menu Overview
Performer 2000 Fresnel DDT MKII Menu Overview Ordercode: 33037... -
Page 19: Main Menu Options
Performer 2000 Fresnel DDT MKII Main Menu Options 01) Upon start-up, the display will interchangeably show two screens: 02) Press the ENTER button to open the main menu. The display will show: 03) Press the UP/DOWN buttons to toggle between the menus. 04) Press the ENTER button to open the desired menu. -
Page 20: Run Mode
Performer 2000 Fresnel DDT MKII 2. Run Mode In this mode you can set the desired operation mode. 01) While in main menu, press the UP/DOWN buttons until the display shows RUNMODE. 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to toggle through the 4 options: ●... -
Page 21: Setting
Performer 2000 Fresnel DDT MKII 6. Setting In this menu you can adjust the device’s special settings. 01) While in main menu, press the UP/DOWN buttons until the display shows SETTING. 02) Press the ENTER button to open the menu. 03) The display will show PASS CODE and you will need to insert a key combination which will unlock this hidden menu. -
Page 22: Performance Settings
Performer 2000 Fresnel DDT MKII 6.4. Performance Settings 01) When the display shows PERFORM, press the ENTER button to open the menu. 02) Press the UP/DOWN buttons to toggle through the 3 modes: Default mode. It provides a compromise between output quality LIVE and noise level. -
Page 23: Refresh Rate
Performer 2000 Fresnel DDT MKII 6.10. Refresh Rate 01) When the display shows PWM RATE, press the ENTER button to open the menu. 02) Press the UP/DOWN buttons to toggle through the 5 options: 600Hz 1200Hz 2000Hz 4000Hz 25000Hz Note: ●... -
Page 24: Dmx Channels
Performer 2000 Fresnel DDT MKII DMX Channels 1 Channel (UNO) Channel 1 – Dimmer 0–255 0–100 % dimmer 2 Channels (DOS) Channel 1 – Dimmer 0–255 0–100 % dimmer Channel 2 – Fine dimmer CH1 must be open. 0–255 Fine dimmer adjustment 3 Channels (STD.P) Channel 1 –... -
Page 25: Cleaning
Performer 2000 Fresnel DDT MKII Cleaning Please follow the next recommendations when cleaning and inspecting lenses and reflectors: Do not use glass or window type cleaners on lenses (glass or polymer) or reflectors. Do not use abrasive materials such as steel wool. Replace lenses if they contain visible damage (cracks or deep scratches) which that may impair their effectiveness. -
Page 26: Troubleshooting
Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Performer to your Showtec dealer. 03) The fuse. Replace the fuse. See page 24 for replacing the fuse. - Page 27 Performer 2000 Fresnel DDT MKII Problem Probable cause(s) Solution ● Check if power is switched on One or more No power to the fixture fixtures do not and cables are plugged in function at all Primary fuse blown ● Replace fuse The device ●...
-
Page 28: Product Specifications
Performer 2000 Fresnel DDT MKII Product Specifications Model: Showtec Performer 2000 Fresnel DDT MKII Input voltage: 100–240V AC, 60/50 Hz Power consumption: 175 W (full output) DMX linking: 30 pcs Fuse: T3,15AL/250 V Dimensions: 380 x 286 x 392 mm (LxWxH) -
Page 29: Dimensions
Performer 2000 Fresnel DDT MKII Dimensions Ordercode: 33037... -
Page 30: Notes
Performer 2000 Fresnel DDT MKII Notes Ordercode: 33037... - Page 31 Performer 2000 Fresnel DDT MKII Ordercode: 33037...
- Page 32 ©2020 Showtec...