Settings - SHOWTEC Spectral PC 1800Z IP65 User Manual

Spectral PC 1800Z IP65
● RED:
● GREEN:
● BLUE:
● WHITE:
● ZOOM:
● STROBE:
● TIME:
● FADE:
06) Press the ENTER button to confirm the selection.
07) Press the UP/DOWN buttons to increase/decrease the values.
08) Press the ENTER button to set the value and to move to the next setting.
09) Repeat steps 7–8 to set all 8 parameters in the scene.
10) Press the MENU button to return to the submenu with the steps.
11) Repeat steps 3–9 to edit the remaining steps of the selected custom program.

Settings

In this menu you can adjust the device's settings. This menu requires a password. The default password is
pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
01) Enter the password.
02) Press the ENTER button to confirm the password and access the menu.
03) Press the UP/DOWN buttons to select one of the following 6 options:
● UPLOAD:
● RESET:
● DIMMER:
● DMX ERROR:
● PWM:
● FULL POWER CCT:
04) Press the ENTER button to confirm the selection.
Product code: 43553
Set the intensity of the red color. The adjustment range is 0–255, from low to
high intensity
Set the intensity of the green color. The adjustment range is 0–255, from low
to high intensity
Set the intensity of the blue color. The adjustment range is 0–255, from low to
high intensity
Set the intensity of the white color. The adjustment range is 0–255, from low
to high intensity
Adjust the zoom. The adjustment range is 0–255, from narrow angle to wide
angle
Add strobe effect. The adjustment range is 0–25, from OFF to high
frequency
Set the duration of the scene. The adjustment range is 0–255, from 0,1 to
approximately 25 seconds
Set the fading effect between the scenes. The adjustment range is 0–255
Upload the parameters of the custom programs (1–10) from the master
device to the connected slave device(s) in master/slave mode. This
submenu requires a password. The default password is pressing the
UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN
See 6.6.8.1. Reset
Select the dimmer speed. The available options are OFF, DIM1, DIM2, DIM3,
and DIM4. DIM4 is the slowest dimming speed
See 6.6.8.2. DMX Error
Set the PWM (Pulse Width Modulation) frequency. The available options are
600 Hz, 1200 Hz, 2000 Hz, 2400 Hz, 6000 Hz, and 25000 Hz
Set the CCT (Correlated Color Temperature). The available options are
3200 K, 4200 K, 5600 K and NORMAL
26