Calibration Service - BRAND Transferpette S-8 Manual

14 Calibration service

14 Calibration service
The ISO 9001 and GLP guidelines require regular inspection of your vol-
ume measuring devices. We recommend performing a volume check ev-
ery 3 to 12 months. The cycle is dependent on the individual requirements
of the device. Checks should be performed more frequently, in case of
high frequency of use or the use of aggressive media.
The complete SOP for testing can be downloaded from www.brand.de or
www.brandtech.com.
BRAND also offers you the option of having your devices calibrated
through our factory calibration service or through our accredited calibra-
tion laboratory. Just send us the devices to be calibrated, indicating the
type of calibration you would like. You will get your devices back in a few
days. A detailed calibration report (factory calibration) or an accredited
calibration certificate in accordance with DIN EN ISO/IEC 17025 is en-
closed with each device. More information can be obtained from your re-
tailer or directly from BRAND. The order document is available for down-
load at www.brand.de (Service & Support).
For customers outside Germany
If you would like to use our calibration service, please contact one of our
service partners in your region. Our service partners can forward your de-
vices to BRAND for factory calibration, if required.
Operating manual Transferpette® S-8/-12 997208
74