Table of Contents
Advertisement
Table 37. Configuration 6: R2c (continued)
Card type
Broadcom (NIC: 10Gb)
Intel (NIC: 10Gb)
Qlogic (NIC: 10Gb)
Broadcom (NIC: 1Gb)
Intel (NIC: 1Gb)
Mellanox (NIC: HDR100 VPI)
Mellanox (NIC: HDR VPI)
Intel (OCP: 100Gb)
Broadcom (OCP: 25Gb)
Intel (OCP: 25Gb)
Marvell (OCP: 25Gb)
Mellanox (OCP: 25Gb)
SolarFlare (OCP: 25Gb)
Broadcom (OCP: 10Gb)
Marvell (OCP: 10Gb)
Intel (OCP: 10Gb)
Broadcom (OCP: 1Gb)
Intel (OCP: 1Gb)
Dell External PERC Adapter
Dell BOSS S1 Module
Intel (PCIe SSD AIC)
Samsung (PCIe SSD AIC)
Removing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
Steps
1. For Riser 1, hold the blue touch points, and lift the expansion card riser from the riser connector on the system board.
80
Installing and removing system components
Slot priority
3
3
3
3
3
3
3
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
Integrated slot
3
Integrated slot
3
3
Safety
instructions.
Before working inside your
Maximum number of cards
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
system.
Advertisement
Table of Contents
