Siemens SIMATIC ET 200AL System Manual page 1350

Integration into the automation system
3.1 Configuration of the IO-Link system
● Device ID
ID number of the device. You can find the Device ID on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109748852).
● Inspection level for data backup:
– Identical type (V1.0) without Backup&Restore
– Type-compatible (V1.1) without Backup&Restore
– Type-compatible (V1.1) with Backup&Restore
– Type-compatible (V1.1) with Restore
The figure below shows you an example of the settings of a port configuration in STEP 7 or
with GSD file:
Figure 3-5
26
Settings of the port configuration in STEP 7 or with GSD file
Function Manual, 12/2017, A5E31637677-AB
IO-Link system