Safety Rules - OREC RABBIT RMK151 Instruction Manual

Check that the machine can work properly : check blade engagement and disengagement, check that the

safety switches work properly.
CHECKS ON DELIVERY
Show the user how to use the machine and perform the adjustments.

Explain to the user the importance of the lubrication and show him the different greasing points on the

machine.
Show him the safety devices, shields, guards and the optional equipments.

Give the instruction manual to the customer, ask him to read it carefully.

Explain to the customert that drive on the public roads is forbidden.

Explain to the customert how to use each control and how works the blade engagement. Explain to never

use the machine if the blade doesn't disengage properly.
Some of the illustrations show the machine with no guard, no shield. Never use the machine
without these devices.
Learn to stop the machine in case of emergency.

Read, understand and respect all the safety instructions of this manual.

Do not let anybody use the machine before having read and understood this

manual.
Do not use the machine near bystanders : they can be hit by thrown objects

Do not let children use the machine.

Check that all the shields, grids and safety guards are in place and

in a good condition.
It is strictly forbidden to carry persons or animals onto the machine

during the work or during the transportation.
Check that nobody stands behind the machine before moving back.

Never stop or start roughly when working on a slope. Never use the

When running on a slope, always work going up or down but never across the slope.

OREC RMK151

SAFETY RULES

Do not wear loose clothes. They might be

grasped by moving parts.
Always wear protection equipments when using

the machine.
Only work during daylight or with a good artificial light.

Check that the safety instruction stickers are in place and in a good state.

Keep the machine free from debris or mud.

Check that the machine can

work properly before any use.
machine to work on a stepping terrain.
 Do not use machine on a slope more
than 10°.
 Reduce the ground
running on a slope and when turning
straight in order to prevent from any risk
of losing control.
 Be very careful when bordering ditches.
 Stop the engine, apply the handbrake and remove the ignition key before any
intervention on the machine.
 Never work under the machine or its parts when lifted, unless they are blocked
and maintained into position with sufficient security.
speed when
4