Table Of Contents; Contents; Specifications; Check List - OREC RABBIT RMK151 Instruction Manual

INTRODUCTION ................................................................................................................................................ 2
CONTENTS ........................................................................................................................................................ 3
SPECIFICATIONS .............................................................................................................................................. 3
CHECK LIST ....................................................................................................................................................... 3
SAFETY RULES ................................................................................................................................................. 4
MACHINE DESCRIPTION .................................................................................................................................. 6
SAFETY INSTRUCTION STICKERS ................................................................................................................. 7
CONTROLS ........................................................................................................................................................ 9
OPERATION .....................................................................................................................................................14
MAINTENANCE OPERATIONS TO BE CARRIED OUT BY THE USER ........................................................17
BREAKDOWNS AND SOLUTIONS .................................................................................................................24
TIGHTENING TORQUES (Nm) ........................................................................................................................24
EC CONFORMITY DECLARATION .................................................................................................................25
MEASUREMENT OF VIBRATIONS .................................................................................................................25
LIMITED WARRANTY ......................................................................................................................................26
NOTES ..............................................................................................................................................................26
INSTRUCTIONS TO THE DEALER
The assembly, the installation and the first application of the machine is under the OREC dealer's
responsability.
Read the instruction manual as well as the safety measures. Check that all the before delivery and at
delivery check points specified in the following lists have been verified and possibly modified before
delivering the machine to its owner.
CHECKS BEFORE DELIVERY
Check that all the shields, grids and safety guards are in place and in a good condition.

Check that the hydraulic hoses are in place and in a good condition. Replace them if necessary.

Check that there is no oil leak, repair if necessary.

Check that the safety instruction stickers are in place and in a good condition. Replace them if necessary.

Check that all the bolts and screws are properly tightened with the correct torque (refer to chart).

Protect the grease nipples by coating them with grease and lubricate the machine.

OREC RMK151

CONTENTS

SPECIFICATIONS

Model
Engine
Transmission
Forward speed
Reverse speed
Cutting width
Height of cut
Weight
Fuel Tank
Blade transmission
Steering
Blade engagement
Width mm

CHECK LIST

RMK151
KAWASAKI FS651V
Hydrostatic
0 - 10 km/h
0 - 7 km/h
135 - 150 cm
50 - 90 cm
331 kg
12 liters
belt
Rack and pinion
Belt tension
1650
3