OREC RABBIT RMK151 Instruction Manual page 5

Steer clear of unsteady embankments, holes or rocks. They might be dangerous during manœuvres or

transport.
Be careful when working on slopes.

Keep away from high-tension lines and obstacles. A contact with a

high-tension line cause electrocution and death.
Stop the machine progressively when travelling up and down slopes.

When stopping the work, stop the engine and put on the handbrake

before leaving the mower.
Engage all the safety equipments.

Move the controls only when the operator is correctly seat down in

the operator seat
Visually check hydraulic leaks and if some parts are faulty or missing.

Repair before use.
A hydraulic oil jet due to a leak can penetrate under the skin causing serious injuries. In this case you must

immediately consult a doctor.
Never change the adjusment of the safety valve, it is set in the factory.

Unsetting this valve would cause failures.
OREC RMK151
Ensure that the user of

machine has already read and
understood this manual and
he is aware of all the safety
instructions before any use.
Always use a chuck and

bronze hammer when replacing or intervening on the pins and bolts
at the end of rams, rod ... etc in order to avoid the projection of metal
fragments.
5
the
that