Jungheinrich DFG 435 Operating Instructions Manual page 87

Positioning the integrated sideshift (option)
Requirements
– To prepare the truck for operation, (see
"Preparing the truck for operation" on
page 71)
Procedure
• Pull the Solo-Pilot lever (118) in direction R to
move the load handler to the right (from the
driver's viewpoint).
• Push the Solo-Pilot lever (118) in direction V
to move the load handler to the left (from the
driver's viewpoint).
The sideshifter is now positioned.
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
118
R
V
87