Jungheinrich DFG 435 Operating Instructions Manual page 66

Driver's seat with pneumatic weight adjustment
o
(MSG 75) (
Procedure
• Pull the weight adjustment lever (98) up to set the seat
to a higher weight.
• Push the weight adjustment lever (98) down to set the
seat to a lower weight.
The driver's weight is correct when the arrow is in the middle of the display window
(99).
Adjusting the seat position
CAUTION!
An unsecured driver's seat can cause injury
An unsecured driver's seat can slide out of its guide during travel, resulting in
accidents.
The driver's seat must be locked in position.
Do not adjust the driver's seat while travelling.
Procedure
• Sit on the driver's seat.
• Pull up the driver's seat locking lever100 in the direction of the arrow.
• Push the driver's seat forwards or backwards to the desired position
• Engage the driver's seat locking lever (100) in position.
The seat position is now correctly set.
Adjusting
o
support ( )
Procedure
• Turn the hand wheel (102) to the
required position.
Position 0 = no warping in lumbar
vertebrae area.
Position 1 = increasing warping in
upper lumbar vertebrae area.
Position 2 = increasing warping in lower
lumbar vertebrae area.
The lumbar vertebrae support is now set.
66
)
the lumbar vertebrae
98
99 98
100 101 102