Jungheinrich DFG 435 Operating Instructions Manual page 163

Adding engine oil
Procedure
• Add fresh engine oil through the filler
port (164) in accordance with the
consumables table.
• Check the engine oil level with the
dipstick (163) and top up if
necessary, (see "Consumables" on
page 151).
• Screw the filler cap back on.
• Attach the floor plate.
NOTE
The incorrect amount of oil will
damage the engine.
After replacing the oil and oil filter carry
out a test run and check the oil
pressure display (82).
Check that the oil drain plug and oil
filter housing are tight.
82
169
170
171
163