Jungheinrich DFG 435 Operating Instructions Manual page 58

Item Control /
Display
70 Direction switch
71 Horn
Slow travel / brake pedal t 1. zone: controls slow travel.
72
73 Parking brake lever
74 Steering wheel
72 Steering column
adjusting lever
76 Key switch
77 Options switch
78 Brake pedal
79 Accelerator pedal
80 SOLOPILOT
t= Series equipment
58
Function
t Selects travel direction / neutral position
t Activates an audible warning.
2. zone: applies service brake.
t Applies / releases parking brake
t Steering the Industrial truck.
t Adjusts the steering column tilt.
t Switches power supply on and off.
Starts and stops the engine.
O - All main circuits are cut out and the key
can be removed.
I - Controls and instruments are switched on.
Engine preheating (diesel only).
II -Starting the motor (automatically returns
to the I position).
t Options
t The truck brakes to a halt immediately when
applied.
t Infinite travel speed control.
t Operates the following functions:
– Load handler lift/lower
– Mast forward / reverse tilt
– Sideshift left / right (o)
– Auxiliary hydraulics (o)
o= Optional equipment