Jungheinrich DFG 435 Operating Instructions Manual page 79

4.7.2 Parking brake
DANGER!
Accident risk
The parking brake will hold the truck with maximum load on a clean ground surface,
on inclines of up to 15%.
Do not park and abandon the truck on an incline.
Applying the parking brake during travel will cause the truck to brake to a standstill.
This may cause the load to slide off the forks tines. There is a higher risk of
accidents and injury!
When leaving the industrial truck, always engage the parking brake. An audible
warning will sound if the parking brake is not applied.
Z
The parking brake can be used as an emergency brake.
Procedure
• Pull back the parking brake lever (73)
beyond the pressure point as far as
the stop. The parking brake is
engaged and the parking brake lever
is locked in this position.
• Press the release knob (110) and
push the parking brake lever forward
to release the parking brake.
110
73
79