Jungheinrich DFG 435 Operating Instructions Manual page 143

Electrical optional equipment
Electrical System
Test electrical optional equipment and check for damage.
Overhead guard cover
Chassis and superstructure
Check overhead guard cover is present, check for damage and
make sure it is secure.
Fire extinguisher
Agreed performance levels
Check fire extinguisher is present, secure and Check test interval.
Belt lock control
Chassis and superstructure
Test belt lock control and check for damage.
Heating
Chassis and superstructure
Check hoses for leaks and damage and make sure they are secure.
Test heating.
Replace heating breather.
Clamping device
Hydraulic operations
Attachment:
Clean and lubricate.
Check hydraulic ports and tighten if necessary.
Check axial play of the front and rear rollers and adjust if necessary.
Check sliding blocks are complete.
Check cylinder seals.
Test operation and setting of the attachment.
Check attachment for damage.
Check cylinder piston rods and bushings.
Test acknowledgement key.
Attachment:
check bearing points, guides and stops for wear and damage,
grease and clean these components.
Test hose reel and check for leaks and damage.
Check attachment is properly secured to the truck and the
supporting elements.
W A B C
t
W A B C
t
W A B C
t
W A B C
t
W A B C
t
t
t
W A B C
t
t
t
t
t
t
t
t
t
t
t
143