Jungheinrich DFG 435 Operating Instructions Manual page 65

Adjusting the driver's weight
NOTE
To achieve optimal seat cushioning the
driver's seat must be set to the driver's
weight.
Set the driver's weight when the seat is
occupied.
Procedure
• Fold out the weight adjustment lever
(98) as far as it will go in the arrow
direction
• Move the weight adjustment lever (98)
up and down to set the seat to a higher
weight.
• Move the weight adjustment lever (98) up and down to set the seat to a lower
weight.
Z
The driver's weight is correct when the arrow is in the middle of the display window
(99). The minimum or maximum weight setting is reached when you can feel a
return stroke on the lever.
• After setting the weight, move the lever (98) back in full.
The driver's weight is now set.
Adjusting the backrest
Procedure
• Sit on the driver's seat.
• Pull the lever (101) to adjust the backrest.
• Adjust the backrest tilt.
• Release the lever (101) again. The backrest is locked.
The backrest is now set.
Z
Hold the weight setting lever (98) only by the recess, never reach through
underneath the lever.
99 98
100 101 102
65