Table of Contents
Advertisement
Repair and Replacement Procedures
RF Vector Network Analyzer
Removing and Replacing the Case Group Parts
N9923AN
7. Position the cases side-by-side as shown in
Figure
7-6.
8. Unplug the battery cable, W10, from the A5 system board at the location indicated.
9. The front and rear cases are now completely separated.
10. Remove the blank side panel by lifting it from the groove in the front case.
Figure 7-6
Separating the Front and Rear Cases (3)
7-10
Service Guide N9923-90005
Advertisement
Table of Contents
Troubleshooting
