Table of Contents
Advertisement
Tests and Adjustments
Information in This Chapter
Information in This Chapter
This chapter contains procedures to help you check, verify, and adjust your N9923AN
analyzer.
• The checks verify the operation of the assemblies in your analyzer.
• The adjustments allow you to tune your analyzer for maximum response.
The Agilent N7841A software package will be required to test and adjust your
NOTE
analyzer. See the section titled
on in this chapter for details.
Chapter Three at-a-Glance
Section Title
Before You Begin
Service Test
Equipment
Before Returning an
Instrument to a
Customer
Operational Check
Performance Tests and
Adjustments
3-2
"Performance Tests and Adjustments"
Summary of Content
Items to consider or procedures to perform before
testing is begun:
Verify the operating environment.
•
•
Protect Against Electrostatic Discharge (ESD)
•
Allow the Analyzer to Warm Up
•
Review the Principles of Connector Care
A list of additional equipment recommended for
servicing the N9923AN analyzer.
A list of things to do before returning an instrument to
a customer after servicing is completed.
An operation check that should be performed before
returning an instrument to a customer.
A list of performance tests and adjustments for the
N9923AN included in the Agilent N7841A software
package.
RF Vector Network Analyzer
N9923AN
farther
Start Page
Page 3-3
Page 3-5
Page 3-6
Page 3-6
Page 3-7
Service Guide N9923-90005
Advertisement
Table of Contents
Troubleshooting
