Table of Contents
Advertisement
9. Install the
SD
card.
10. Follow the procedure in
Haptics trackpad FPC
Removing the touchpad FPC
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
M.2 solid-state
5. Remove the
VPU
card, for systems shipped with a VPU card.
6. Remove the Battery.
7. Remove the
left
fan.
8. Remove the
right
fan.
9. Remove the heatsink.
10. Remove the
system
board.
About this task
CAUTION:
The information in this removal section is intended for authorized service technicians only.
The following images indicate the location of the touchpad FPC and provide a visual representation of the removal procedure.
100
Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
drive, for systems shipped with a solid-state drive.
computer.
computer.
Before working inside your
Advertisement
Table of Contents
