Table of Contents
Advertisement
Steps
1. Align and place the GPU card into the slot on the system board.
2. Replace the two (M2x4) screws to secure the GPU card in place.
3. Align and place the PC bridge bracket into the slot on the system board.
4. Replace the two (M2x4) screws to secure the PC bridge bracket in place.
5. Align and place the GPU card bridge into the slot on the system board.
6. Replace the four (M1.6x4.5) screws to secure the GPU card bridge in place.
7. Align and place the two GPU card FPC interposer boards into the slot on the system board.
8. Align and place the GPU card FPC into the slot on the system board.
9. Replace the four (M1.4x4) T5 Torx screws sequentially as mentioned on the GPU card FPC to secure the GPU card FPC in
place.
Next steps
1. Install the heatsink.
2. Install the Battery.
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
82
Removing and installing Field Replaceable Units (FRUs)
After working inside your
computer.
Advertisement
Table of Contents
