Table of Contents
Advertisement
About this task
NOTE:
The following procedure is applicable for systems shipped with an integrated system board only.
The following image indicates the location of the GPU card and provides a visual representation of the installation procedure.
Steps
1. Align and place the dummy GPU card into the slot on the system board.
2. Replace the two (M2x4) screws to secure the dummy GPU card in place.
3. Align and place the PC bridge bracket into the slot on the system board.
4. Replace the two (M2x4) screws to secure the PC bridge bracket in place.
Removing and installing Field Replaceable Units (FRUs)
85
Advertisement
Table of Contents
