Vpu Card; Removing The Vpu Card - Dell M5680 Owner's Manual

The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure.
NOTE: The following procedure is applicable for models shipped with an M.2 2280 solid-state drive in the SSD1 and/or
SSD2 slot.
Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card connector.
2. Slide the M.2 2280 solid-state drive into the M.2 card connector on the system board.
3. Align and place the solid-state drive thermal plate in place.
4. Replace the single (M2x2) screw to secure the solid-state drive thermal plate to the system board.
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in

VPU card

Removing the VPU card

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the SD card.
3. Remove the base cover.
NOTE: The following procedure is applicable for models shipped with a VPU card in the SSD2 slot only.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
49