Sd Card Reader Fpc; Removing Sd Card Reader Fpc; Installing Sd Card Reader Fpc - Dell P114F Service Manual

SD card reader FPC

Removing SD card reader FPC

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the primary solid-state
4. Remove the secondary solid-state
5. Remove the battery.
6. Remove the long CAMM
NOTE: For models shipped with long CAMM module.
7. Remove the inner frame.
About this task
The figure indicates the location of the SD card reader FPC and provides a visual representation of the removal procedure.
Steps
1. Disconnect the SD card reader FPC from its connector on the SD card reader and system board.
2. Peel to remove the SD card reader FPC from the computer chassis.

Installing SD card reader FPC

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the SD card reader FPC and provides a visual representation of the installation procedure.
before working inside your
drive.
drive.
module.
computer.
Removing and installing components 59