.
Steps
1. For systems shipped with an integrated GPU card, loosen the three captive screws in descending order (3>2>1) that secure
the heat sink to the system board.
2. For systems shipped with a discrete GPU card, loosen the seven captive screws in descending order (7>6>5>4>3>2>1) that
secure the heat sink to the system board.
3. Lift the heat sink off the system board.
NOTE:
Themal pads (thermal conductors) are on the heatsink. If the heatsink is replaced, the new heatsink is shipped
with thermal pads. Ensure all thermal pads are in place between the heatsink and the system board.
60
Removing and installing Field Replaceable Units (FRUs)