Table of Contents
Advertisement
Steps
1. Align and place the bottom assembly under the hinges of the display assembly.
2. Replace the eight (M2.5x5) screws to secure the display assembly to the computer.
3. Align and place the interposer board on the computer.
CAUTION:
The pins on the interposer board are very fragile. Avoid contact with the pins on the board,
instead handle the board by lifting and holding from the edges or the sides.
4. Connect the display FPC cable to the connector on the system board.
Removing and installing Field Replaceable Units (FRUs)
67
Advertisement
Table of Contents
