Table of Contents
Advertisement
Steps
Place the palm-rest assembly on a flat surface.
Next steps
1. Install the
power button with fingerprint
2. Install the
WLAN
antennas.
3. Install the speakers.
4. Install the
system
board.
5. Install the
GPU card
or
6. Install the
smart-card reader
7. Install the heatsink.
8. Install the
right
fan.
9. Install the
left
fan.
10. Install the
display
assembly.
11. Install the Battery.
12. Install the
VPU
card, for systems shipped with a VPU card.
13. Install the
M.2 solid-state
14. Install the
base
cover.
15. Install the
SD
card.
16. Follow the procedure in
118
Removing and installing Field Replaceable Units (FRUs)
reader.
dummy GPU
card.
for systems shipped with a smart-card reader.
drive, for systems shipped with a solid-state drive.
After working inside your
computer.
Advertisement
Table of Contents
