Table of Contents
Advertisement
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: ATOM
Responsible Party - U.S. Contact Information
Renishaw Inc.
1001 Wesemann Drive
West Dundee
Illinois
IL 60118
United States
Telephone number: +1 847 286 9953
Email:
usa@renishaw.com
ICES-003 – Information Technology Equipment (including Digital Apparatus)
This ISM device complies with Canadian ICES-003(A).
Cet appareil ISM est conforme à la norme ICES-003(A).
ATOM FPC readhead and ACi
The ATOM FPC readhead and ACi have been designed as system components and to be
compliant with EMC regulations for products of their type. Care must be taken with shielding and
grounding arrangements to ensure EMC performance once installed. It is the system integrator's
responsibility to implement, test and prove EMC compliance for the whole machine.
Intended use
The ATOM linear encoder system is designed to measure position and provide that information
to a drive or controller in applications requiring motion control. It must be installed, operated, and
maintained as specified in Renishaw documentation and in accordance with the Standard Terms
and Conditions or the Warranty and all other relevant legal requirements.
Further information
Further information relating to the ATOM encoder range can be found in the ATOM
encoder system data sheet (Renishaw part no. L-9517-9563). This can be downloaded from
our website at
www.renishaw.com/atomdownloads
Renishaw representative.
Packaging
The packaging of our products contains the following materials and can be recycled.
Packaging
Material
Component
Cardboard
Outer box
Polypropylene
Low density polyethylene foam
Inserts
Cardboard
High density polyethylene bag
Bags
Metalised polyethylene
REACH regulation
Information required by Article 33(1) of Regulation (EC) No. 1907/ 2006 ("REACH")
relating to products containing substances of very high concern (SVHCs) is available at
www.renishaw.com /
REACH.
Disposal of waste electrical and electronic equipment
The use of this symbol on Renishaw products and /or accompanying documentation
indicates that the product should not be mixed with general household waste
upon disposal. It is the responsibility of the end user to dispose of this product at a
designated collection point for waste electrical and electronic equipment (WEEE) to
enable reuse or recycling. Correct disposal of this product will help to save valuable
resources and prevent potential negative effects on the environment. For more
information, contact your local waste disposal service or Renishaw distributor.
™
miniature
and is also available from your local
Recycling
ISO 11469
Guidance
Not applicable
Recyclable
PP
Recyclable
LDPE
Recyclable
Not applicable
Recyclable
HDPE
Recyclable
PE
Recyclable
www.renishaw.com
7
Advertisement
Table of Contents
