Signal Amplitude Adjustment - Renishaw ATOM RTLF Series Installation Manual

Signal amplitude adjustment

Suitable for:
Applications where the readhead mounting bracket allows full adjustment of the readhead and
the Renishaw USB set-up tool kit and software or an oscilloscope can be used to monitor the
output signals.
Required parts:
• 'L' mount bracket (A-9402-0037) or customer designed bracket
• 2 × bracket mounting screws
• 2 × M2 × 6 screws
• ATOM readhead
• Oscilloscope or Renishaw USB set-up tool kit and software
For more information on system tolerances refer to the installation drawings at
com/atomdownloads.
1. Mount the readhead onto the bracket.
2. Loosely mount the readhead bracket onto the axis.
3. Using the Renishaw USB set-up tool kit or an oscilloscope adjust the yaw, pitch and
rideheight of the readhead to maximise the signal strength.
4. Tighten the bracket and readhead fixing screws.
5. Connect the system up. See pages 25
6. Check the readhead set-up LED is green along the full axis of travel.
1
For more information on bracket design and the Renishaw USB set-up tool kit, contact your local Renishaw representative.
1
www.renishaw.
to 36 for relevant system connection.
Pitch
Rideheight
Yaw
www.renishaw.com 43